• Tarun Raj Singh
• Prithivipati

CLC block is made by using the cement, sand, fine aggregate, fly ash and foaming agent. CLC block is also thermal resistant, sound insulated, light in weight. Under this study, we examining the impact of RHA on the compressive strength and water absorption of the CLC block. To study this, we make a three different kind of mix and make an 8 block in each kind of mix. The size of each block is 300×150×200 mm. Then we place them in the water for the curing process. After 28 days we perform a 3 test on them, Block density test, Compressive strength test and Water absorption test. The results revealed that, the compressive strength of that block is maximum, the density of which is maximum out of three. Water absorption of that block is maximum, the density of which is lowest. When we compare the compressive strength of these blocks with the standard block, we see that the compressive strength of these blocks is higher in comparison with the blocks which not have RHA. Which means the RHA helps in gaining the strength of the CLC block.

Agricultural waste, Cellular light weight concrete, Fly Ash, Foaming agent, Red Clay Brick, Rice Husk Ash.

"Experimental study on the effect of rice husk ash on the compressive strength and water absorption of cellular light weight concrete block", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.71-73, May 2019, Available :http://www.jetir.org/papers/JETIRCY06011.pdf

"Experimental study on the effect of rice husk ash on the compressive strength and water absorption of cellular light weight concrete block", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp71-73, May 2019, Available at : http://www.jetir.org/papers/JETIRCY06011.pdf