• Gavendra Norkey
• -

Abstract: This review article is based on the industrial demand of the present scenario in the area of machining of the metal matrix composites. This paper has been presented an overview of the machining of the Al Metal Matrix Composites (Al-MMC). Metal matrix composite is the right choice for manufacturing sectors due to the properties of the materials such as low weight, good strength, and corrosion free. Machining of the Al-MMC by the selected cutting tools and extra material is moved out from the surface of the workpiece in the form of chip and convert into desired size and shape by controlling of parameters i.e. cutting speed, feed and depth of cut. In machining surface finish is desired so that cutting tool plays a major role. Due to the abrasive surface of the composite materials cutting tools may be wearing in very less time so that researchers and industries are doing more effort in this direction. There are various tools may be used like carbides either plain or coated for machining of the MMC. Surface quality of the AL-MMC can be achieved by the proper controlling of the parameters and maintain the condition of the tools. After completing the machining processes analysis can be done for the experimental collected data. For the optimization purposes various techniques may be used. Some techniques can be used such as ANN, analysis of variance and Multilayer perceptron model will be construct with back-propagation type algorithm.

Keywords: Metal Matrix Composites, Machining, cutting tools, non-traditional machining methods, cutting speed.

"Improvement Of Surface Quality Of Al- Metal Matrix Composite: A Review", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 11, page no.538-542, November 2018, Available :http://www.jetir.org/papers/JETIRDS06085.pdf

"Improvement Of Surface Quality Of Al- Metal Matrix Composite: A Review", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 11, page no. pp538-542, November 2018, Available at : http://www.jetir.org/papers/JETIRDS06085.pdf