• Manpreet Singh
• Sumit Shoor
• Rajeev Kumar

Abstract: In welding process heat is required for welding which is mostly taken form electric arc .Electric arc is generated from electric current. Depending upon heat different mechanical properties were obtained so it is always desired to know the heat flow and effect of heat input in welding.. The important process parameters which are required to be considered in any welding are heat source, welding speed, heat input, temperature dependent material properties etc. Temperature distribution is effected by the process parameters like welding speed current etc selected during the welding. In this paper attempt has been made to simulate the effect of welding parameters of submerged arc welding on temperature distribution so as to determine the cooling rates in different directions with respect to weld axis

Key words: Submerged arc welding, ANSYS, process parameters

"Effect of welding parameters on temperature distribution using Finite element Simulation", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 11, page no.614-620, November 2018, Available :http://www.jetir.org/papers/JETIRDS06090.pdf

"Effect of welding parameters on temperature distribution using Finite element Simulation", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 11, page no. pp614-620, November 2018, Available at : http://www.jetir.org/papers/JETIRDS06090.pdf