UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 11 | November 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 11 Issue 1
January-2024
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRGB06046


Registration ID:
529472

Page Number

358-376

Share This Article


Jetir RMS

Title

Comparision of experimental results of different tool alloys materials with FEA analysis

Abstract

In this research work the Investigation of Tool Wear and Tool Life with Optimization of parameters on different tool alloys on S1(SS316),S2(SS304),S3(SS410),S4(SS440C),S5(HSS),S6Titanium alloy gradeS6 (Ti-6Al-4V) Tool material ,Workpiece material ,Max. Time elapsed(in min.)Flank wear(in mm),Wear rate m/min For mild steel workpiece material at low cutting speed the shear force of theSS440C(S4) material is high a scompared to the HSS (S6)tool. For aluminium workpiece material, at lower cutting speed SS316(S1) has a greater Shear force than the Titanium alloy (Ti-6Al-4V) (S5), but at higher cutting speeds Titanium alloy(Ti-6Al-4V)(S5)was found to have higher Shear force thanSS316(S1).For mild steel workpiece material, at all cutting speeds tool life of HSS (S6) andSS440C(S4)was found to be relatively close. For aluminium workpiece material, at all speeds Titanium alloy (Ti-6Al-4V) (S5) was found to be having longer tool life than SS316(S1) and (Ti-6Al-4V) S5 tool cost is very high compare to other tools (S6) (S4)(S3) (S2)(S1). Finally the cutting tool Titanium alloy (Ti-6Al-4V) (S5) and HSS (S6) is good compare to other alloy materials with FEA analysis is carried with less 10% error.

Key Words

S1(SS316),S2(SS304),S3(SS410),S4(SS440C),S5(HSS),S6Titanium alloy gradeS6 (Ti-6Al-4V) Tool material, FEA analysis, Optimization of parameters.

Cite This Article

"Comparision of experimental results of different tool alloys materials with FEA analysis", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 1, page no.358-376, January-2024, Available :http://www.jetir.org/papers/JETIRGB06046.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Comparision of experimental results of different tool alloys materials with FEA analysis", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 1, page no. pp358-376, January-2024, Available at : http://www.jetir.org/papers/JETIRGB06046.pdf

Publication Details

Published Paper ID: JETIRGB06046
Registration ID: 529472
Published In: Volume 11 | Issue 1 | Year January-2024
DOI (Digital Object Identifier):
Page No: 358-376
Country: -, -, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000130

Print This Page

Current Call For Paper

Jetir RMS