• Sunnykumar Devappa Chilami
• Vaibhav Anand Raut
• Sagar Suresh Chavan
• Shubham Bhausaheb Jagtap
• Omkar Babaso Chavan

This project aims at designing and manufacturing a semi-automated hydraulic c clamp that can perform pressing operations without the involvement of any human operator. This project is selected because no such machines are available in these industries. Introducing a semi-automated hydraulic c clamp in the industries will help the industries prosper and make operations safe and easy. Moreover, the project will have a greater impact on the metal industries. The machine will be capable of performing fast and accurate alignment of metal operations. Here we are fabricating the model for press operation and it is known here we are fabricating the model for press operation as a hydraulic press machine or hydraulic C clamp. Hydraulics is a topic in applied and it is known science and engineering dealing with the mechanical properties of liquids. Fluid mechanics provides the theoretical foundation for hydraulics, which focuses on the engineering uses of fluid properties. In fluid power, hydraulics is used for the end of the system as a piston with a small cross-sectional area driven by a lever to increase the force. Small- diameter tubing leads to the other end of the system generation, control, and transmission of power by the use of pressurized liquids, here our system to making of pressing operation. The hydraulic press depends on Pascal’s principle: the pressure throughout a closed system is constant.

Hydraulic C-Clamp, Semi-automated hydraulic system, Pressing operations automation, Hydraulic press design

"Design and Development of hydraulic C-Clamp", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 5, page no.f831-f836, May-2024, Available :http://www.jetir.org/papers/JETIR2405591.pdf

"Design and Development of hydraulic C-Clamp", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 5, page no. ppf831-f836, May-2024, Available at : http://www.jetir.org/papers/JETIR2405591.pdf