• NIKANT PATEL
• PARTH PANDYA
• VISHAL PATEL
• JATIN PATEL

Thermometric cooling uses the Peltier effect to create a heat flux between the junctions of two different types of materials. A Peltier cooler, heater, or thermometric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other, with consumption of electrical energy, depending on the direction of the current. Such an instrument is also called a Peltier device, Peltier heat pump, solid state refrigerator, or thermometric cooler (TEC). It can be used either for heating or for cooling, although in practice the main application is cooling. It can also be used as a temperature controller that either heats or cools. This technology is far less commonly applied to refrigeration than vapor-compression refrigeration system. The primary advantages of a Peltier cooler compared to a vapor-compression refrigerator are its lack of moving parts or circulating liquid, very long life, invulnerability to leaks, small size and flexible shape. Its main disadvantage is high cost and poor power efficiency. Many researchers and companies are trying to develop Peltier coolers that are both cheap and efficient. A Peltier cooler can also be used as a thermometric generator. When operated as a cooler, a voltage is applied across the device, and as a result, a difference in temperature will build up between the two sides. When operated as a generator, one side of the device is heated to a temperature greater than the other side, and as a result, a difference in voltage will build up between the two sides (the Seebeck effect). However, a well-designed Peltier cooler will be a mediocre thermometric generator and vice versa, due to different design and packaging requirement.

Peltier Module, Condenser, Water Block, D.C Converter, Submerisible Pump, Conventional Pump

"Design & fabrication of air cooler & heater using thermoelectric effect", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.519-522, May-2019, Available :http://www.jetir.org/papers/JETIR1905B75.pdf

"Design & fabrication of air cooler & heater using thermoelectric effect", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp519-522, May-2019, Available at : http://www.jetir.org/papers/JETIR1905B75.pdf