• B N Ravi Kumar
• H N Vidyasagar
• H K Shivanand
• Santosh D N

Aluminium is used, matrix material for its outstanding mechanical properties conjugate with great formability. Various technological problem arises in casting process for a uniform distribution of reinforcement materials. In this present, work Al 6061 alloy act as a matrix and chopped E glass fibre with micro titanium as a reinforcement materials. Stir casting is the best technique for preparation of Al hybrid mmc because it reduces the casting defects and improve the uniform mixing of reinforcement material and matrix. Al 6061 alloy heated up to its melting temperature at around 690° C. Initially heated reinforcement material, is included to molten aluminum with constant stirring speed at 250 rpm. Composite are prepared as per ASTM standards for Wear analysis, Tensile, bending test were performed. The wear tests performed in Pin on Disc apparatus at various loads. From the experimental results the minimum wear, high bending and high tensile strength found in Al 6061 mmc. Distribution of reinforcement were observed by SEM.

Al 6061 alloy, micro titanium, E glass fibre, Tensile strength, mmc, stir casting

"MECHANICAL AND TRIBOLOGICAL BEHAVIOR OF AL6061 HYBRID METAL MATRIX COMPOSITES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.2762-2766, May-2019, Available :http://www.jetir.org/papers/JETIR1905U79.pdf

"MECHANICAL AND TRIBOLOGICAL BEHAVIOR OF AL6061 HYBRID METAL MATRIX COMPOSITES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp2762-2766, May-2019, Available at : http://www.jetir.org/papers/JETIR1905U79.pdf