• Vishal Sharma
• Omer Abdulaziz Farhan Alqadhi
• Ganesh Kantak

Surface grinding is one of the important material removal processes which is applied at the last stage of high dimensional accuracy and desirable surface finish product can be obtain in manufacturing process. Grinding process is applied for the finishing dissimilar parts of automotive engine like splined shaft, crankshaft, gears and guide ways etc. there are different types of grinding process used in manufacturing industries in present time i.e. cylindrical grinding, surface grinding, creep- feed grinding and central less grinding. In this research work surface grinding machine is used for obtain high metal removal rate and lower surface roughness on the flat surface of material. EN 31 alloy steel is taken as experimental material which is commonly used in automotive industries and the production of molding dies, shear blades, cutting tools, bolts etc. in this present work three input parameters depth of cut (D), Feed rate(F), number of passes are used at various range and surface roughness, metal removal rate are the performance parameter and taguchi design in MINITAB software is used to obtain optimum performance parameters. Data accomplished by taguchi method, results shows that the maximum MRR is 0.14385gm/sec and minimum surface roughness is 0.23µm and wheel speed and number of passes are the most significant parameters of surface grinding process.

surface grinding machine, surface roughness, material removal rate, taguchi method, depth of cut, No. of passes, wheel speed

"EVALUATION OF SURFACE GRINDING RESPONSE PARAMETERS OF EN31 ALLOY STEEL ON SURFACE GRINDING MACHINE BY USING TAGUCHI METHODOLOGY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.10, Issue 9, page no.d698-d705, September-2023, Available :http://www.jetir.org/papers/JETIR2309375.pdf

"EVALUATION OF SURFACE GRINDING RESPONSE PARAMETERS OF EN31 ALLOY STEEL ON SURFACE GRINDING MACHINE BY USING TAGUCHI METHODOLOGY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.10, Issue 9, page no. ppd698-d705, September-2023, Available at : http://www.jetir.org/papers/JETIR2309375.pdf