• K V Vara Lakshmi
• Kondeti Shiva Narasimha
• Bodapati Jayanth Venkat Surya
• K Raghavendra
• P P S Keerthi

Additive manufacturing is one of the latest growing approaches that gives the ability to rapid design, test and improve concepts, as well as mass-production. In the present work, the effect of the infill patterns on tensile strength of thermoplastic components are studied. Computer-Aided-Design (CAD) software is used to develop the required specimens, which are then imported into ANSYS Workbench for the stress-strain simulation. The materials selected for the analysis are PLA, ABS thermoplastics. The infill patterns selected for the analysis are honeycomb, triangle, square-grid. For each infill pattern, the specimens were designed with an infill density value of 50%. Static Structural analysis is carried out to predict the stress and elastic strain generated during the tensile test in each specimen.

Tensile strength, Infill pattern, Infill ratio

"Evaluation of Infill Type Effect on Strength of Thermoplastic Components", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 1, page no.e611-e618, January-2024, Available :http://www.jetir.org/papers/JETIR2401474.pdf

"Evaluation of Infill Type Effect on Strength of Thermoplastic Components", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 1, page no. ppe611-e618, January-2024, Available at : http://www.jetir.org/papers/JETIR2401474.pdf