• Kharat Amol
• Talekar Sanket
• Jadhav Sumit
• More Suresh
• Shelke Ram

The polymer matrix composites are widely used in various mechanical applications. Aim of this project is to study of the Wear, Coefficient of Friction & Frictional Force Polyether-Ether-Keton (PEEK) matrix composites with Glass Fibers (GF). Also, under dry Friction conditions the Wear, Coefficient of Friction & Frictional Force of PEEK matrix composites was studied at temperatures 500C, 1000C & 1500C. Pure PEEK is having low Friction Coefficient and high Wear rate, so its applications are limited. At room temperature the Friction and Wear of PEEK can be improved by adding different fillers such as Glass Fiber, Carbon Fiber and Metallic Fibers etc. It is found that PEEK with 30 percent by weight GF at 1500C have good Wear resistance. Also at 80 N load under dry condition Wear performance of PEEK with 30 percent by weight GF was improved.

Investigation of Tribological Behavior of Peek Composite with Glass Fiber

"Investigation of Tribological Behavior of Peek Composite with Glass Fiber", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 2, page no.214-216, February-2019, Available :http://www.jetir.org/papers/JETIRAE06051.pdf

"Investigation of Tribological Behavior of Peek Composite with Glass Fiber", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 2, page no. pp214-216, February-2019, Available at : http://www.jetir.org/papers/JETIRAE06051.pdf