• Jaswant Rajpurohit
• Saikiran Karambe
• Yashashavi Choudhary
• Prof. Parmeshwari Aland

By measuring the sum of the voltage drops around several closed paths, and the sum of the currents at several nodes, in two resistive circuits, We have experimentally tested Kirchhoff’s Voltage Law and Kirchhoff’s Current Law. A low resistance circuit was constructed using resistors in the range of 1[k], and a high resistance circuit was constructed using resistors in the range of 10[M]. Kirchhoff’s Current Law, that states that the algebraical total of the currents at a node is zero, was found to be accurate to within 1% error. Kirchhoff’s Voltage Law, that states that the algebraical total of the voltage drops around a control system is zero, was found to be accurate to within 1% error when applied to the low resistance circuit, but when applied to the high resistance circuit gave errors of 10 to 20%. The reason for this discrepancy isn't understood, however is believed to be associated with the operation of the meter once wont to live voltages across giant resistances. With the exception of the voltage law applied to high resistance circuits, we conclude that Kirchhoff’s Laws accurately predict the behaviour of resistive circuits

Circuits, Current, Measurement, Resistors, Voltage

"Experimental Verification of Kirchhoff’s Voltage Law and Kirchhoff’s Current Law.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.323-331, May-2019, Available :http://www.jetir.org/papers/JETIRBU06057.pdf

"Experimental Verification of Kirchhoff’s Voltage Law and Kirchhoff’s Current Law.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp323-331, May-2019, Available at : http://www.jetir.org/papers/JETIRBU06057.pdf