• Sachin Purandare
• Ujjaval Shah

In developing countries, the methods used to recycle and re-use waste materials should be investigated in order to benefit from natural resources effectively. Reuse of construction and demolition waste is one of the most important goals of the construction industry. Conversion of raw materials, used or waste materials provides significant energy savings by reducing the number of industrial processes in the production of materials. The advantages of the use of these SCCs, are mainly the combination of stability to segregation and great fluidity they offer in the fresh state. A high volume of marble production has generated a considerable amount of waste materials; almost 70% of this mineral gets wasted in the mining, processing and polishing stages which have a serious impact on the environment. The processing waste is dumped and threatening the aquifer. Therefore, it has become necessary to reuse these wastes particularly in the manufacture of concrete products for construction purposes. The main goal of this study is to demonstrate the possibility of using marble wastes as a substitute rather than natural aggregates in concrete production. It was observed that workability of concrete mixes containing marble aggregate was 14% more than that of control concrete. The average compressive strength of all the concrete mixes containing marble aggregate increased by 40% and 18% at 7 and 28 days, respectively.

Marble aggregate, self-compacting concrete, Compressive Strength, Fresh property

"AN INVESTIGATION ON PROPERTIES OF S.C.C BY PARTIAL REPLACEMENT OF COARSE AGGREGATE WITH WASTE MARBLE CHIPS: A REVIEW", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.280-282, May - 2019, Available :http://www.jetir.org/papers/JETIRCQ06050.pdf

"AN INVESTIGATION ON PROPERTIES OF S.C.C BY PARTIAL REPLACEMENT OF COARSE AGGREGATE WITH WASTE MARBLE CHIPS: A REVIEW", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp280-282, May - 2019, Available at : http://www.jetir.org/papers/JETIRCQ06050.pdf