• Nitesh Bhardwaj
• Mohd Sharique
• Rajat jain
• Kunal gupta
• Mohd Fahad

Disposal of waste tyre rubber has become a major environmental issue in all parts of the world representing a very serious threat to the ecology. One of the possible solutions for the use of scrap tyre rubber is to incorporate it into concrete, to replace some of the natural aggregate. The paper evaluates the influence of the rubber powder on material characteristics and durability of CRC. CRCs with various contents of fine and coarse crumb powder were compared. The tested parameters were slump, air content, permeability, resistance of concrete to water with deicing chemicals, compressive and splitting tensile strength. The tests showed that workability, compressive strength and permeability decreased as the amount of rubber increased, but the air content increased as the rubber content increased. Photos of air voids in cement matrix from electron microscope were captured (SEM is a type of electron microscope that produces images of a sample by scanning the surface with a focused beam of electrons. The electrons interact with atoms in the sample, producing various signals that contain information about the surface topography and composition of the sample.) The results of laboratory tests showed that admixture of rubber powder in concrete could have a positive impact on durability of concrete and concurrently contribute to sustainable development. Considering the lower compressive strength, CRC is recommended for use in applications where the high strength of concrete is not required.

Aggregates, Compressive strength, Crumb tyre, Flexural strength, Tensile strength, Weight loss.

"Review paper-Effect of crumb rubber tyre in conventional concrete", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.73-76, June 2019, Available :http://www.jetir.org/papers/JETIRDH06012.pdf

"Review paper-Effect of crumb rubber tyre in conventional concrete", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp73-76, June 2019, Available at : http://www.jetir.org/papers/JETIRDH06012.pdf