• Rohan K
• Roshan Rai
• N Bhavani Shankar
• Akshay NK

Marble stone industry generates both solid and stone slurry and as per previous survey solid waste generation is more in marble stone industry, in and about 40% of waste is formed, that is around 68 million tones .So by dumping these wastes to the land may cause environmental problem and also effect the fertility of the soil. Therefore the scientific and industrial community must take responsibility towards more sustainable practices. There are many reuse and recycling solutions for industrial bi-product both at an experimental and in practical application. The physical, chemical and mechanical properties of the waste are studied. In this present study, concrete mix was prepared according to IS 10262:2009 and experimental studies were carried out to investigate the strength properties of M30 concrete made with various mixes. Properties studied include compressive strength, flexural strength and split tensile tests of hardened concrete. Marble dust used was 0%, 5%,10%,15%,20%.And also strength will be compared with conventional concrete.

Marble Dust (MD), Pozzolanic cement (PPC), Compression Test, Split Tensile Tests, Flexural Tests.

"Influence of Marble Dust as Partial Replacement of Cement in Normal Curing Concrete", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.2, Issue 4, page no.1142-1147, April-2015, Available :http://www.jetir.org/papers/JETIR1504054.pdf

"Influence of Marble Dust as Partial Replacement of Cement in Normal Curing Concrete", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.2, Issue 4, page no. pp1142-1147, April-2015, Available at : http://www.jetir.org/papers/JETIR1504054.pdf