• KUSHAL V. GAWANDE
• A. B. Amale
• Shekhar S. Chikhale
• Manoj Kumar Barik

Failure mode and effect analysis (FMEA) is systematic, proactive method for evaluating the process to identify were and it might be fail to assist the relevant impact of different failures in order to identify the part of processes that are most needed of the change. The FMEA process consist of step wise process starting from potential failure causes ,study existing and complete the working of mechanism , calculate the risk priority number (RPN)of existing and modified. The presented paper deals with the review of various industrial case studies and their implementation of FMEA. This project discuses and implementation of Process Failure mode and effect analysis for improvement in welding process. This work is performed in the “LEMKEN India Agro Equipment Private Limited.” MIDC Buttibori Nagpur. We consider various parameters and examine them. The parameters which we focused ranked them according to the Ford Motor Company Reference Manual of Fourth Edition. Severity, Occurrence and Detection are ranked to calculate the Risk Priority Number (RPN). The Risk Priority Number (RPN) is the product of Severity, Occurrence and Detection which gives the idea about the most affecting parameter in the existing welding process. Studying that parameter we take the corrective action and calculate the RPN again so those to confirm the affecting parameter are minimized or not. In this way we can eliminate the failure

Severity, Occurrence, Detection and RPN, DFMEA, PFMEA, MIG welding and risk evaluation

"Failure Mode and Effect Analysis on Base Frame – Case Study", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.2, Issue 4, page no.1283-1287, April-2015, Available :http://www.jetir.org/papers/JETIR1504082.pdf

"Failure Mode and Effect Analysis on Base Frame – Case Study", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.2, Issue 4, page no. pp1283-1287, April-2015, Available at : http://www.jetir.org/papers/JETIR1504082.pdf