UGC Approved Journal no 63975

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 8 | Issue 5 | May 2021

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 3 Issue 5
May-2016
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1605044


Registration ID:
160186

Page Number

249-258

Share This Article


Jetir RMS

Title

A review on errors & Analysis for the prediction of life of mild steel by different corrosion monitoring technique

Abstract

Mild Steel is one of the major construction materials used in the industries. Corrosion is one of the serious problem affecting ship, pipe line and aviation industries. It affects the body of ship and thickness of pipe and an Aeroplane wings, surface, between joints and fasteners With the increased utilization of this metal in the manufacturing and construction firms, one of the major problems encountered is the control of corrosion rate when exposed to different corrosive environments. Corrosion is a natural process that reduces the binding energy in metals with the end result involving a metal being oxidized as the bulk metal losses one or more electrons During the thickness measurement of any corrode plate, Any material whose thickness is lower than the low limit of the probe due to corrosion of metal piece will cause Measurement errors. Sometimes the displayed reading is twice as big as the actual thickness. To prevent these errors, the critical thin Materials should be measured repeatedly for verification. This paper looks at the root causes of poor performance with ultrasonic This paper summarizes some of the major aspects of precision ultrasonic thickness gauging. Ultrasonic nondestructive testing (NDT) characterizing material thickness, integrity, or other physical properties by means of high-frequency sound waves has become a widely used technique for quality control. In thickness gauging, ultrasonic techniques permit quick and reliable measurement of thickness without requiring access to both sides of a part.The presences of corrosion underneath the paints of surface and between joints are not easy to be detected. The unnoticed presence of corrosion may cause the many accident leading to human and money loses. To detect the thickness of the metal surface, various methods and tests are used. These tests conducted should be such that it does not destroy or disassemble the equipment to parts or damage its surface Hence for the further use of the equipment, Non-destructive tests (NDT) are carried out. In the field of NDT industry one of the most important method to detect the thickness of component is the ultrasonic thickness measurement. The change in the thickness of any plate with respect to the time is also helpful for determining the corrosion rate and prediction of remaining life of corrode plate as well as prediction for the measurement error due to corrosion of any steel plate.

Key Words

NDT, UT, Corrosion, measurement errors

Cite This Article

"A review on errors & Analysis for the prediction of life of mild steel by different corrosion monitoring technique", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.3, Issue 5, page no.249-258, May-2016, Available :http://www.jetir.org/papers/JETIR1605044.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"A review on errors & Analysis for the prediction of life of mild steel by different corrosion monitoring technique", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.3, Issue 5, page no. pp249-258, May-2016, Available at : http://www.jetir.org/papers/JETIR1605044.pdf

Publication Details

Published Paper ID: JETIR1605044
Registration ID: 160186
Published In: Volume 3 | Issue 5 | Year May-2016
DOI (Digital Object Identifier):
Page No: 249-258
Country: DURG, Chhatisgarh, India .
Area: Engineering
ISSN Number: 2349-5162


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002459

Print This Page

Current Call For Paper

Jetir RMS