UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 2 Issue 7
July-2015
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1701603


Registration ID:
315942

Page Number

1321-1331

Share This Article


Jetir RMS

Title

Influence of cold working on Mechanical and metallographic characteristics of low carbon steel (S355)

Abstract

In the era of rapid industrialization various grades of steel is extensively utilized. This class of material is essentially imbibed with specific characteristics such as corrosion resistance behavior, good formability and high yield strength etc. The specific aim of this work is to analyze the effect of cold rolling process on the mechanical properties of low carbon steel grade S355. The prepared specimens undergoing the cold rolling process with 0 to 30% cold work percentage and was annealed at the temperature of 400°C for 1 hour. The ultimate tensile strength (tensile test), toughness (Charpy impact test) and hardness (Vickers test) of each specimen was conducted to analyze the Mechanical properties. Further microstructure analysis of the S355 steel before and after cold rolling treatment was conducted to characterize the material. The results enumerates that both tensile strength and toughness of material is augmented with increasing percent reduction in specimen thickness for 0 to 30 percent. Furthermore, the microscopic observation implies micro structural modification (elongation and compression of grains) and increase in the mechanical properties which justifies its application as a structural material.

Key Words

Steel grade S355, Cold rolling, Tensile strength, Mechanical properties, Microstructure.

Cite This Article

"Influence of cold working on Mechanical and metallographic characteristics of low carbon steel (S355)", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.2, Issue 7, page no.1321-1331, July-2015, Available :http://www.jetir.org/papers/JETIR1701603.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Influence of cold working on Mechanical and metallographic characteristics of low carbon steel (S355)", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.2, Issue 7, page no. pp1321-1331, July-2015, Available at : http://www.jetir.org/papers/JETIR1701603.pdf

Publication Details

Published Paper ID: JETIR1701603
Registration ID: 315942
Published In: Volume 2 | Issue 7 | Year July-2015
DOI (Digital Object Identifier):
Page No: 1321-1331
Country: -, -, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000551

Print This Page

Current Call For Paper

Jetir RMS