• Mr.Suraj R Karpe
• Mr.Sanjay A Deokar
• Dr.A.M.Dixit

In Power Electronics, Predictive Current control (PCC) and Predictive Torque control (PTC) methods are advanced control strategy. To control a Permanent Magnet Synchronous motor machine (PMSM) or induction machine (IM), the predictive torque control (PTC) method evaluates the stator flux and electromagnetic torque in the cost function and Predictive Current control (PCC) [1] considers the errors between the current reference and the measured current in the cost function. The switching vector selected for the use in IGBTs minimizes the error between the references and the predicted values. The system constraints can be easily included [4, 5]. The weighting factor is not necessary. Both the PTC and PCC methods are most useful direct control methods with PMSM method gives 10% to 30% more torque than an induction motor also not require modulator [3]. Induction motor work on only lagging power factor means it can produce only 70-90% of torque produced by PMSM with same current. PCC and PTC method with 15-level H-bridge multilevel inverter using PMSM reduces 23% more THD in torque, speed and stator current compared to PCC and PTC method with 15-level H-bridge multilevel inverter using induction motor [21]. Switching losses are minimized because the transistors are only switched when it is needed to keep torque and flux within their bounds. The switching pattern of semiconductor switches used to get better performance of multilevel inverter. In this paper, the PTC and PCC methods with 15-level H-bridge multilevel inverter using PMSM and IM are carried out; gives excellent torque and flux responses, robust, and stable operation achieved compared to the PTC and PCC methods with 2-level voltage source inverter. This novel method attracted the researchers very quickly due to its straightforward algorithm and good performances both in steady and transient states [8].

Electrical drives, predictive current control (PCC), predictive torque control (PTC), Permanent Magnet Synchronous Motor (PMSM), Induction Motor, 15-level H-Bridge multilevel inverter, Voltage Source Inverter (VSI).

"Performance improvement of Predictive Control methods of MPDTC Strategies for Electrical Drives using multilevel inverter", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.3, Issue 1, page no.119-130, January-2017, Available :http://www.jetir.org/papers/JETIR1701A12.pdf

"Performance improvement of Predictive Control methods of MPDTC Strategies for Electrical Drives using multilevel inverter", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.3, Issue 1, page no. pp119-130, January-2017, Available at : http://www.jetir.org/papers/JETIR1701A12.pdf