• P.VIGNESH
• Mr.M.KARTHIKEYAN
• MS. P.SARALA
• L. SRIKANTHAN

Natural river sand is expensive due to excessive cost of transportation from natural sources. Also large-scale exploitation of these sources creates environmental problems. As environmental transportation and other constraints make the availability and use of river sand less attractive, a substitute or replacement product for concrete industry needs to be found. River sand is most commonly used fine aggregate in the production of concrete poses the problem of acute shortage in many areas. Whose continued use has started posing serious problems with respect to its availability, increases in cost and environmental impact. In such a situation the Manufacture Sand can be an economic alternative to the river sand and which is cost effective. This study presents the behaviour of self compacting concrete (SCC) with the replacements material. The fine aggregate is partially replaced with Manufacture sand. . In addition to that steel fibres are to be added in proper proportion. Suitable dosage of super plasticizers are also should be added for achieving increased workability. The objective of the investigation is to develop a reinforced concrete beam with Manufacturing sand as partial replacement for fine aggregate. Then the results are to be compared with the conventional beams.

M-sand, Testing, Analyzing the strength.

"EXPERIMENTAL INVESTIGATION ON M-SAND WITH STEEL FIBRE IN SELF COMPACTING CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.4, Issue 12, page no.679-690, December-2017, Available :http://www.jetir.org/papers/JETIR1712128.pdf

"EXPERIMENTAL INVESTIGATION ON M-SAND WITH STEEL FIBRE IN SELF COMPACTING CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.4, Issue 12, page no. pp679-690, December-2017, Available at : http://www.jetir.org/papers/JETIR1712128.pdf