• Suman Sharma
• Manpreet Kaur

In this study, ground water samples were collected from twenty tube-wells of different villages of the study area. The samples have been analyzed for physico-chemical parameters like pH, electrical conductivity (EC), total dissolved solids (TDS), total alkalinity (TA), total hardness (TH), chloride (Cl-),sodium(Na+) and potassium(K+) ions. The results showed that pH, EC, TDS, Cl-, TH,TA, sodium(Na+) and potassium(K+) ions ranged from 7.83 to 8.65, 0.50 to 2.04(mS), 320.64 to 1,307.2(mg/L), 5.89 to 264.90(mg/l),186 to 392(mg/l),98 to 272(mg/l), 39.5 to 220.3(mg/l) and 6.3 to 19.7(mg/l) respectively. All the measured parameters were within the standard limits of water quality values suggested by WHO and BIS. The concentration of the chemicals detected in groundwater of Sangrur is found good for irrigation and drinking purposes as it met the standards laid by WHO.

Physico-chemical parameters, Ground water quality, Water quality standards

"Analysis of Water Quality Parameters of Groundwater in Sangrur District of Punjab(India)", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 8, page no.200-209, August-2018, Available :http://www.jetir.org/papers/JETIR1808028.pdf

"Analysis of Water Quality Parameters of Groundwater in Sangrur District of Punjab(India)", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 8, page no. pp200-209, August-2018, Available at : http://www.jetir.org/papers/JETIR1808028.pdf