• Swarnima
• Dr. Ajay Bindlish.

Fly ash is a waste product from thermal power station. The only way to reduce the pollution of fly ash disposal efforts is recycled and reused in a variety of engineering applications. Properly managed, fly ash can be put in beneficial reuse, reducing the environmental footprint that it produces. The quality of fly ash can affect the quality and strength on engineering applications. In this paper to gain strength fly ash is replaced by sand at different proportion as 10%, 20%, and 30%. In these proportion mixture some laboratory tests as compaction tests, CBR tests, and direct shear tests are conducted. As results found that adding sand by replacing fly ash have better results.

Fly ash, sand, angle of internal friction, shear strength, CBR.

"Stabilization Of Fly Ash Using Sand", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 8, page no.282-286, August-2018, Available :http://www.jetir.org/papers/JETIR1808684.pdf

"Stabilization Of Fly Ash Using Sand", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 8, page no. pp282-286, August-2018, Available at : http://www.jetir.org/papers/JETIR1808684.pdf