• Dr.R.DEVASARAN
• S.RADHA KRISHNA REDDY
• T.SANTHOSH KUMAR

The sliding mode controller is to achieve terminal voltage regulation while ensuring maximum power point tracking. Based on the voltage sensitivity analysis, to eliminate the possibility of interference with the other device in the micro grid development by the controller. In control systems, sliding mode control, or SMC, is a nonlinear control method that alters the dynamics of a nonlinear system by application of a discontinuous control signal that forces the system to "slide" along a cross-section of the system's normal behavior. The proposed methods: 1) no need to require synchronous coordinate transformation.2) to require to eliminates for decoupled proportional integral loops.3) can be implemented while in the absence of widespread communication. Dynamic models are considered for the double fed induction wind generators, converters, and internal controller along with their operational limits. Stochastic fluctuations in wind speed are modeled with NREL. Turbine while accounting for tower shadow and wind shear. Dynamic simulations are presented to access the control performance with voltage fluctuation compensation and control system robustness.

Micro-grid, robust sliding mode control, Voltage regulation, DFIG.

"Regulation of Voltage in Micro grids by using Sliding Mode Control Technique", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 11, page no.137-143, November-2018, Available :http://www.jetir.org/papers/JETIR1811415.pdf

"Regulation of Voltage in Micro grids by using Sliding Mode Control Technique", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 11, page no. pp137-143, November-2018, Available at : http://www.jetir.org/papers/JETIR1811415.pdf