UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 5 Issue 5
May-2018
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR18IC025


Registration ID:
181422

Page Number

108-111

Share This Article


Jetir RMS

Title

SOIL MOISTURE SENSOR BASED INTELLIGENT IRRIGATION SYSTEM WITH GSM TECHNOLOGY

Abstract

In this project an automation of farmirrigation and soil moisture control by Arduino using soil moisture sensor and L293D module. This automatic irrigation system senses the moisture content of the soil and automatically switches the pump when the power is on. A proper usage of irrigation system is very necessary because the main reason is the shortage of land reserved water due to lack of rain, spontaneous use of water as a result large amounts of water goes waste. For this reason, we use this automatic plant watering and soil moisture monitoring system and this system is very useful in all climatic conditions. India is the agriculture based country. Our most of peoples are completely depended on the agricultural harvesting. Agriculture is a source of employment of majority Indians and has great impact on the economy of the country. In dry areas or in case of lacking rainfall, irrigation becomes difficult. So, it needs to be automated for proper watering a plant and handled remotely by farmer. When soil goes dry pump will start watering. The aim of the implementation is to reduce water use and automatic irrigation can be used for save time and low power monitor device. The aim of the implementation this project was to demonstrate that the automatic plant irrigation can be used to reduce water use, and save your time. disturbed soils in dry areas and during periods of inadequate rainfall. When a zone comes on, the water flows through the lateral lines and ultimately finally ends up at the irrigation electrode (drip) or mechanical device heads. Several sprinklers have pipe thread inlets on the lowest of them that permits a fitting and also the pipe to be connected to them. The sprinklers are usually used in the top of the head flush with the ground surface [9]. As the method of dripping will reduce huge water losses it became a popular method by reducing the labor cost and increasing the yields. When the components are activated, all the components will read and gives the output signal to the controller, and the information will be displayed to the user (farmer). The sensor readings are analog in nature so the ADC pin in the controller will convert the analog signals into digital format [8]. Then the controller will access information and when the motors are turned On/Off it will be displayed on the LCD Panel, and serial monitor windows [10]. There are many systems are available to water savings in various crops, from basic ones to more technologically advanced ones. For instance, in one system plant watering status was monitored and irrigation scheduled based on temperature presents in soil content of the plant.

Key Words

Automatic Watering System, Arduino-I. board, sensors, relay, motor, Internet of things

Cite This Article

"SOIL MOISTURE SENSOR BASED INTELLIGENT IRRIGATION SYSTEM WITH GSM TECHNOLOGY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 5, page no.108-111, May-2018, Available :http://www.jetir.org/papers/JETIR18IC025.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"SOIL MOISTURE SENSOR BASED INTELLIGENT IRRIGATION SYSTEM WITH GSM TECHNOLOGY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 5, page no. pp108-111, May-2018, Available at : http://www.jetir.org/papers/JETIR18IC025.pdf

Publication Details

Published Paper ID: JETIR18IC025
Registration ID: 181422
Published In: Volume 5 | Issue 5 | Year May-2018
DOI (Digital Object Identifier):
Page No: 108-111
Country: Nagpur, Maharashtra, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003545

Print This Page

Current Call For Paper

Jetir RMS