• ShivRaj
• Sandeep Sannamani
• Dr.I.Satyanarayana

In this thesis, project detailed design of trainer aircraft wing structure made by using PRO-ENGINEER WILDFIRE 5.0. Then stress analysis of the wing structure is carried out to compute the stresses at wing structure. The stresses are estimated by using the finite element approach with the help of ANSYS to find out the safety factor of the structure. In a structure like airframe, a fatigue crack may appear at the location of high tensile stress. Life prediction requires a model for fatigue damage accumulation, constant amplitude S-N (stress life) data for various stress ratios and local stress history at the stress concentration. The response of the wing structure will be evaluated. In this thesis, the trainer aircraft wing structure with skin, spars and ribs is considered for the detailed analysis. The wing structure consists of 15 ribs and two spars with skin. Front spar having „I‟ section and rear spar having „C‟ section. Stress and fatigue analysis of the whole wing section is carried out to compute the stresses and life at spars and ribs due to the applied pressure load

Finite element analysis, aircraft wing, wing with ribs and spars

"DESIGN AND FINITE ELEMENT ANALYSIS OF AIRCRAFT WING USING RIBS AND SPARS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 1, page no.131-139, January-2019, Available :http://www.jetir.org/papers/JETIR1901219.pdf

"DESIGN AND FINITE ELEMENT ANALYSIS OF AIRCRAFT WING USING RIBS AND SPARS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 1, page no. pp131-139, January-2019, Available at : http://www.jetir.org/papers/JETIR1901219.pdf