• G.Rameshchowdary

Taguchi Method is a statistical approach to optimize the process parameters and improve the quality of components that are manufactured. The objective of this study is to illustrate the procedure adopted in using Taguchi Method to a lathe facing operation. The orthogonal array, signal-to-noise ratio, and the analysis of variance are employed to study the performance characteristics on facing operation. In this analysis, three factors namely speed; feed and depth of cut were considered. Accordingly, a suitable orthogonal array was selected and experiments were conducted. After conducting the experiments the surface roughness was measured and Signal to Noise ratio was calculated. With the help of graphs, optimum parameter values were obtained and the confirmation experiments were carried out. These results were compared with the results of full factorial method.

Annova, Design of Experiments, Facing Operation, Orthogonal Array, S/N Ratio, Taguchi Method.

"OVERVIEW ON TAGUCHI METHOD", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 1, page no.769-771, January-2019, Available :http://www.jetir.org/papers/JETIR1901499.pdf

"OVERVIEW ON TAGUCHI METHOD", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 1, page no. pp769-771, January-2019, Available at : http://www.jetir.org/papers/JETIR1901499.pdf