• Prithvi Mohan yadav
• Mr. Shivam Singh patel

Continuously reinforced concrete pavement (CRCP)” as the title suggests this type of pavement is reinforced throughout in longitudinal direction. This type of pavement has no transversejoints unless and until there is end of pavement or the pavement comes in contact with some other pavement or bridge. A longitudinal joint exists only if the road is wider than 14 feet. Due to reduction of joints smooth and continuous riding is possible resulting in fuel saving. Also CRCP roads are maintenance free if properly constructed and care is taken while placement of steel. Once CRCP roads are constructed they need not to be taken care of for the next 50-60 years. The principal behind this roads is that “Let the road crack”, exactly opposite as in case of other type of roads where we avoid crack formation at any cost. CRCP is allowed to crack due to which stresses in the pavement are released. The cracks formed are held tightly by the reinforcement, due to which widening and deepening of cracks is restricted. Hence we can conclude that in CRCP controlled cracking is permitted. The initial cost of CRCP is high, but as it is maintenance free, and lasts for decades, overall cost of CRCP is less as compared to other type of reinforced concrete pavements. Study and observations have shown that this type of roads are alarmingly successful, hence CRCP is widely used in USA, GERMANY, BRITAN, and several other developed and developing nations. Use of CRCP will enhance the cement, and steel industries; it will reduce the fuel consumption by vehicles, and will save lots of money required for frequent construction and repairs of other type of pavements.

Highway engineering

"Continuously Reinforced Concrete Pavement", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 1, page no.597-600, January-2019, Available :http://www.jetir.org/papers/JETIR1901679.pdf

"Continuously Reinforced Concrete Pavement", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 1, page no. pp597-600, January-2019, Available at : http://www.jetir.org/papers/JETIR1901679.pdf