• S.EDWIN JOSE
• S.RAMARAJ

This paper presents a modified bridge type flux-coupling non-superconducting fault current limiter (BSFC-NSFCL) for suppressing the fault current. A flux-coupling reactor and a bidirectional bridge switch are combined to perform the functions of steady-state line current sharing and fault current suppression. The proposed system is addressing a new and modern optimization tool such as cat swarm optimization (CSO) algorithm. It is generated by observing the behaviors of cats, and composed of two sub-models, i.e., tracing mode and seeking mode, which model upon the behaviors of cats. The modified CSO based BSFC-NSFCL mainly utilizes the magnetic flux cancellation effect to make the limiter behave as a short circuit on the circuit during normal operation. Hence, there is almost no impact on the power system when the limiter is used. When a fault event occurs, the bridge switch turns off immediately, and then the magnetic flux cancellation effect disappears. Thus, the impedance of primary coil inserts into the circuit to restrict the fault current phenomena. Once the fault is removed, the bridge switch turns on again, and the BSFC-NSFCL recovers to the normal operation. The output result have implemented the MATLAB and also prototype model hardware results are validated.

CAT SWARM OPTIMIZATION, BSFC-NSFCL,MATLAB

"CAT SWARM OPTIMIZATION BASED SOLID STATE FAULT CURRENT LIMITER IN DISTRIBUTION SYSTEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 2, page no.460-469, February-2019, Available :http://www.jetir.org/papers/JETIR1902375.pdf

"CAT SWARM OPTIMIZATION BASED SOLID STATE FAULT CURRENT LIMITER IN DISTRIBUTION SYSTEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 2, page no. pp460-469, February-2019, Available at : http://www.jetir.org/papers/JETIR1902375.pdf