• Vismay Dilipkumar Gor
• Jignesh Patel

Deep drawing process is widely used in industries. Quality of product is highly depending upon the accuracy of finished product. Which can be achieved through controlling the thickness variation of the finished product. The parameters considered for the thickness variation are Punch nose radius which is required to minimize the defect in drawing product, Die shoulder radius and Blank holding force. This is greatly affected on the design of machine tool for the deep drawing process. Experimental approach is used with taguchi design to simulate the model. ANNOVA is used to identify the effect of each parameter and results can be seen through interaction plots. General linear model is developed to simulate the results. Genetic Algorithm is implemented to identify the optimum parameters for the minimum thickness variation. MATLAB software used for the optimization. Optimization tool box are used to import the conditions and evaluate the results.

Deep drawing, DOE, Taguchi, ANOVA, Optimization, MATLAB, etc…

"Experiment investigation and optimization of some parameters on strain for Stainless steel-202 using Deep Drawing ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 2, page no.591-604, February-2019, Available :http://www.jetir.org/papers/JETIR1902585.pdf

"Experiment investigation and optimization of some parameters on strain for Stainless steel-202 using Deep Drawing ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 2, page no. pp591-604, February-2019, Available at : http://www.jetir.org/papers/JETIR1902585.pdf