• Arpan Mistry
• Dr. Vallabh D Patel
• Prof. Kaushal Bhavsar

Advancement of AL alloy has become more popular because of its specific application in aerospace and automotive industry. Fusion welding of AL alloys like 2xxxxx, 6xxxxx and 7xxxxx is difficult to perform. It has wide scope to weld Aluminum alloys using friction stir lap welding. Welded using cylindrical pin tool using two tool rotating speed of 710, 1400 rpm and at two different feed rates of 40 and 80 mm/min and its influence on tensile strength of Aluminum alloy 6061. Tool used for friction stir lap welding (FSLW) were made from high speed steel H13 with work hardening. Joint strength was evaluated by tensile test.

"Review on investigative study of friction stir lap welding product", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.22-24, March-2019, Available :http://www.jetir.org/papers/JETIR1903258.pdf

"Review on investigative study of friction stir lap welding product", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp22-24, March-2019, Available at : http://www.jetir.org/papers/JETIR1903258.pdf