• RAVISELVAN S
• RAJESWARI R
• PRASANNAVALLI R

The objective of the project is to provide the continuous power supply to the consumer and provide the facility to control the distribution system with program logic control. Where the system has two major parts according to the appliance as follows, PLC control unit and an automated power line switching unit. This proposed system has two types of power lines such as the main feeders(R, Y, B, and N) and an auxiliary feeder. The auxiliary feeder is used to transmit the power at when the main feeder in maintenance or faulty condition. In this proposed system, the Arduino PLC control unit provides the facility to switch the feeder by using a serial command with help of USB2.0 and the automatic power line switching unit is used to switch the power supply to the auxiliary feeder in an automatic manner with SMS alert, at when the main feeder in a faulty condition.

Automatic power line switching unit, Arduino PLC control unit, USB 2.0 cable, Controller, Solid State Device (SSD), Global System for Mobile communication (GSM/GPRS).

"Uninterrupted Power Distribution System with Arduino PLC Control", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.390-395, March-2019, Available :http://www.jetir.org/papers/JETIR1903553.pdf

"Uninterrupted Power Distribution System with Arduino PLC Control", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp390-395, March-2019, Available at : http://www.jetir.org/papers/JETIR1903553.pdf