• Shweta Meena
• Sharad Singhal
• Amal Singh Naruka
• Yash Mewara
• Kavita Jain

The aim of this project is high voltage generation by Marx generator. This project contains: MOSFET, capacitor stacks, microcontroller and other electrical equipments. The Marx generator is an electrical circuit first described by Erwin Otto Marx in 1924. Its purpose is to generate a high-voltage pulse from a low-voltage DC supply. In this project a number of capacitor are charged in parallel to a given voltage and their connected in series by MOSFET gap switch ideally producing a voltage of V Multiplied by the number of capacitor or stages. An excessive voltage pulse is produced by capacitor connection in parallel for charge up to on-time after the installation in connection collection for the off length duration. The circuit of this project includes diodes, MOSFET, capacitor, and a microcontroller. Diodes are used for charging the capacitors at each stage. Capacitor charged during on time using microcontroller and during off time it delivered power in order by using MOSFET switches. By this project our aim to make smooth device that generates 8 volts to approx 32 volts.

Marx Generator, Microcontroller, MOSFET

"Enhancement in DC Voltage Using Marx Generator ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.125-127, March-2019, Available :http://www.jetir.org/papers/JETIR1903817.pdf

"Enhancement in DC Voltage Using Marx Generator ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp125-127, March-2019, Available at : http://www.jetir.org/papers/JETIR1903817.pdf