• Kinjal Rank
• Jaydeep Bhanderi
• Dr. J. V. Mehta
• Shyamkumar Marsonia
• Trivedi Harshraj

Improvement of properties of expansive soil in terms of strength, durability and cost is the key from engineering point of view. The expansive soils could be stabilized using industrial waste. In paper present about study and comparison of properties of black cotton soil stabilized with the help of lime fly ash as stabilizer & cement dust manufacturing waste (CDMW) as stabilizer Fly ash and Cement dust manufacturing waste (CDMW) are industrial by-product, Day by day increasing the rate of various infrastructure demand of cement binding mineral may increase rapidly. The disposal of this fine dust like CDMW and fly ash becomes a more difficult as environmental aspect and also it’s affect human nature as get suspended on air. In this paper we study about soil engineering properties with addition of cement dust manufacturing waste (CDMW) as stabilizer and lime fly ash as stabilizer and compare in terms of soil properties like shear strength, swelling pressure and various engineering parameters like OMC& MDD, CBR value by conducting appropriate tests. With the help of above properties results we can Keeping in mind that the needs for bulk mass of solid waste can be utilized effectively, and also help to keeping good environment by using stabilizer as waste material.

Expansive soil, Cement dust manufacturing waste (CDMW) stabilizer1, lime fly ash stabilizer2, soil stabilization, shear strength, OMC& MDD, CBR value.

"Comparative Study on Effect ofExpansive Soil Properties While Using Stabilizer as Lime Fly ashAnd Cement Dust Manufacturing Waste", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.269-275, March-2019, Available :http://www.jetir.org/papers/JETIR1903834.pdf

"Comparative Study on Effect ofExpansive Soil Properties While Using Stabilizer as Lime Fly ashAnd Cement Dust Manufacturing Waste", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp269-275, March-2019, Available at : http://www.jetir.org/papers/JETIR1903834.pdf