• Sagar N. Sakharkar
• Potdar Dayanand G
• Kavhale Shivraj D.
• Sankpal Ganesh A
• Kulkarni Amey S

The recent trends of additive manufacturing (AM) is focused on development of large size components which difficult to manufacture by conventional methods. It get hard to obtain standard method guidelines or methodology to develop reproducible model and has target shape oriented in manufacturing. Scaling of additive manufacturing required expertise from practical application which allow knowledge of automated building construction and product process development. Concrete printable unit is used to deposit concrete in case and it studied for building in large scale using additive manufacturing technique. Developing prototype raised challenges in deposition of material due to material deformation at concrete transition from fresh to hardened state. Influence of effective parameter studied including layer thickness, printed orientation and movements. The results of study used to develop tool for predicting deformation of concrete layer in additive process.

Additive Manufacturing, RSM, Scaling Product Development

"Testing and Evaluation of Concrete Prototypes of Additive Manufacturing using Response Surface Methodology", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.383-388, March-2019, Available :http://www.jetir.org/papers/JETIR1903A59.pdf

"Testing and Evaluation of Concrete Prototypes of Additive Manufacturing using Response Surface Methodology", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp383-388, March-2019, Available at : http://www.jetir.org/papers/JETIR1903A59.pdf