• Raviraj Kachhot
• Jigar Suthar
• Jaimin Patel

MMCs are made by dispersing a reinforcing material into a metal matrix. Metal matrix composites (MMC) have become a leading material among composite materials, and in particular, particle reinforced aluminum MMCs have received considerable attention due to their excellent engineering properties. These materials are known as the difficult-to-machine materials because of the hardness and abrasive nature of reinforcement element-like aluminum oxide particles (Al2O3). In this study, the following experimental studies are carried out in the present investigation. Development of aluminum Al2O3 composite are made via stir casting route using graphite mold. The composites are fabricated with Al2O3 in rang of 2.5 wt. %, 7.5 wt. % and 12.5 wt. %. And microstructure studies are carried out of weight % of Al2O3 and effect of composite, by using of advance microscope. The microstructure analysis reveals uniform distribution of reinforcement Al2O3.

Metal matrix composite, Al- Al2O3, Stir cast, Microstructure analysis

"“DEVELOPMENT AND ANALYSIS OF Al-Al2O3 METAL MATRIX COMPOSITE”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 3, page no.970-974, March-2019, Available :http://www.jetir.org/papers/JETIR1903H37.pdf

"“DEVELOPMENT AND ANALYSIS OF Al-Al2O3 METAL MATRIX COMPOSITE”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 3, page no. pp970-974, March-2019, Available at : http://www.jetir.org/papers/JETIR1903H37.pdf