• SHAH SAJAN
• Rakesh Prajapati
• Deepjyoti Basak

The Drilling is a metal removing process carried out by a rotating cutting tool to make rounded hole in the strong materials. A power operated machine tool which hold the drill in the spindle rotating high speeds and when actuated mode linearly against the work-piece produced a hole Jig and fixture is replaced by the magnetic vice so we can reduced the clamping time of work piece. The magnetic vice is the use for habit is the utilized for holding and supporting work-piece. This magnetic vice is arrangement at base on the drilling machine and switch direct connection with magnetic vice. The work-piece is fit at the magnetic vice. Exactness is higher compared to the other work-holding device. Power consumption is diminished. Clamping time is reduce and increased production. DC base system is used work is not pending and system is continuous working when power will be off. So no human harmful. We will Research on magnetic vice and Define the parameters decide Size of sample and select the sample.

magnetic vice, clamp, drilling machine metal working operation, industrial application Etc.

"Development and Optimization of Magnetic Vice in Drilling Machine", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.78-83, April-2019, Available :http://www.jetir.org/papers/JETIR1904716.pdf

"Development and Optimization of Magnetic Vice in Drilling Machine", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp78-83, April-2019, Available at : http://www.jetir.org/papers/JETIR1904716.pdf