• mahesh singh
• Tabish Izhar

1. Abstract: - The change in hardened properties of fresh self compacting concrete and glass fiber reinforced self compacting concrete are compared. Also the influence of glass fiber on fresh and hardened properties of self compacting concrete is investigated. The utilized of glass fiber in SCC improved mechanical properties and durability an hardened concrete mixture SCC compare the fresh properties (compressive strength, splitting tensile strength, and flexural strength) of SCC with varying glass fiber percentage % .and SCC with (Glass Fiber Reinforced Concrete) GFRC were prepared with a water cement ratio of 0.35 .it was found that addition of glass fiber to be slightly reduced the workability properties of SCC. Compressive strength and splitting tensile strength of SCC were found to be slightly higher than fresh SCC. The purpose of this study is to investigate the workability and mechanical properties of plain SCC and GFRSCC. The laboratory testing included slump flow test, L – box test sieve segregation resistance test, density test compressive strength test splitting tensile strength, and flexural strength. The doses of super plasticizer required increased as fiber content increased there has been a lack of studies for productivity improvement in the construction industry. We have selected the major factor such as material Labor and accessed it both quantitatively for a real time construction project. The result enhanced profit and productivity.

self compacting concrete, glass fiber, mechanical properties, fly ash, glass fiber reinforced concrete.

"Experimental study on glass fiber reinforced self compacting concrete.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.394-401, April-2019, Available :http://www.jetir.org/papers/JETIR1904D53.pdf

"Experimental study on glass fiber reinforced self compacting concrete.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp394-401, April-2019, Available at : http://www.jetir.org/papers/JETIR1904D53.pdf