• Jainik Patel
• Dr. Diptesh Patel

In the present era, it is very essential to utilize the conventional energy sources. Alike, solar energy is similar type of, we can maximize the usage and store it for our daily use. As earlier the water was used as heat transfer medium in the flat plate collector, and their were so many disadvantage of using it. So, we are using nanofluid intead of it. So, in this research work, we have tried to maximize the efficiency and utilization of energy by keeping in mind the following parameters like solar tilt angle, inlet and outlet temperature, type of nano fluid used, area of collector, mass flow rate etc. The different data have been collected and calculated by performing experiment and best of them have been mentioned in it by analytical analysis. The result show that in comparision with water as absorption medium using the nanofluids as working fluid increase the efficiency.

Flat plate collector, nano fluid, temperature, solar tilt angle, efficiency, useful heat gain.

"Experimental Investigation of Flat Plate Collector By Using Nanofluid ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.653-656, April-2019, Available :http://www.jetir.org/papers/JETIR1904G03.pdf

"Experimental Investigation of Flat Plate Collector By Using Nanofluid ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp653-656, April-2019, Available at : http://www.jetir.org/papers/JETIR1904G03.pdf