• Bhavsar Miraj
• Dr. Diptesh Patel
• Pravin Zinzala

Decreasing the diameter of copper tube is advantageous to Decrease the quantity of copper material Consumption in heat exchanger. The reduction of the diameter of the copper tube can decrease the volume of the heat exchanger. The aim of this study is to find-out the finned tube coil heat exchange performance with design in split air-conditioners. Finned tube coil is cad-model using simulation & heat transfer method. Results will be comparing with the 7mm Fin-Tube model. So, it is possible to find-out the performance without experimental test which are costly & takes lengthy duration. Main reason of this study is to simulate split air conditioner finned tube coil heat exchanger performance with heat transfer & design modification together for higher energy efficiencies demands & affordable in residential air conditioning systems with higher capacities for heat transfer. By using the simulation software EVAP-COND to simulate the heat exchange performance and compare the refrigerant pressure drop, refrigerant mass flow rate, copper mass consumption with the condenser and Optimize using ISHED Simulation.

Split air conditioners, finned tube coil, Simulation, Heat transfer performance, circuit optimization, R32

"Simulation Analysis of Finned Tube Coil Heat Exchanger for Split-Air Conditioner", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.764-771, April-2019, Available :http://www.jetir.org/papers/JETIR1904G17.pdf

"Simulation Analysis of Finned Tube Coil Heat Exchanger for Split-Air Conditioner", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp764-771, April-2019, Available at : http://www.jetir.org/papers/JETIR1904G17.pdf