• SURENDRAKUMAR B AGASHE
• MANISH T. SHETE

Friction stir welding plays an important role in the manufacturing and transport industries due to relevant advantages. In this research friction stir welding with the combination of two or three plates (skin and stringer) having thickness 6 mm aluminium alloy AA2014-T6 which makes T-joint will be studied by changing the process parameters such as rotation of tool and welding speed. The three types of joint configuration (T-lap joint, T-butt joint and T-butt lap) is to be welded by using three different tool geometry (cylindrical, conical and pyramidal in shape). The further improved parameters of friction stir welding were determined based on the macro and micro-observations of the T-joint. After performing welding operation, the metallographic examinations and tensile testing were performed to evaluate the welding qualities and mechanical properties of the Friction Stir Welded T-joints

Friction Stir Welding, T-Joints configuration, Pin Geometry, Tensile Test, Microstructure Analysis

"A Review on Experimental analysis of mechanical properties of Aluminium Alloy (AA 2014) Friction Stir Welded T-Joint", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.31-37, April-2019, Available :http://www.jetir.org/papers/JETIR1904P06.pdf

"A Review on Experimental analysis of mechanical properties of Aluminium Alloy (AA 2014) Friction Stir Welded T-Joint", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp31-37, April-2019, Available at : http://www.jetir.org/papers/JETIR1904P06.pdf