• Marmika Y. Shinde
• Harsh S. Sukhadia
• Abhay P. Rana
• Jigisha B. Thakkar

A chemical reactor is an enclosed vessel in which a chemical reaction takes place. Agitator shaft is used to mix the ingredients inside the chemical reactors. To prevent the reaction of the ingredients with the material of the agitator and surface of reactor, glass lining is provided on the agitator and inner side of the reactor. To avoid the damage of glass lining the components used in chemical reactors must be precisely placed. This project is about maintaining repeatability in reassembling drive assembly of chemical reactors which reduces the cycle time required for resetting the parameters like coaxiality, concentricity and flatness. Coaxiality and concentricity must be maintained to prevent damage of glass lining and mechanical seal. Flatness must be maintained to avoid leakage of ingredients during working condition. Therefore, each parameter like coaxiality, concentricity and flatness have to be maintained within the range of 20-50 microns. This paper contains the experiments carried out to analyse which components affect the parameters and the problems occurring due to the existing method of assembly along with their solutions.

Assembly, Parameters, Repeatability

"Analyzing and Improving Process of Assembly for AE and CE Type Chemical Reactors to Maintain Repeatability", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.7-12, May-2019, Available :http://www.jetir.org/papers/JETIR1905302.pdf

"Analyzing and Improving Process of Assembly for AE and CE Type Chemical Reactors to Maintain Repeatability", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp7-12, May-2019, Available at : http://www.jetir.org/papers/JETIR1905302.pdf