• saurabh gupta
• sumit gangwar
• saurabh sachan

As we know that the world’s two most populated countries, China and India. The current population of India is about 1362 million as Thursday, January 31, 2019, 36% of the world’s population. And the population density in India is 460 per km2 (1192 people per m2).Therefore growth rate of population causes the scarcity of land area and environmental degradation. So it required newly constructed house, demolished the old structures, new infrastructure projects by government day by day. Lack of good aggregates is important problem in construction industry. The disposal of sewage wastes comprises as one of the major worldwide environmental problems as these wastes render the environment unfriendly. The growing demand for waste utilization has made solid wastes like sludge and demolition waste an essential composition of this study. The possibility of reduction of the production costs provides a strong logic for use of this waste. Moreover the bulk density of the sample also decreased. A maximum of 2.61 g/cm3 was achieved for a 30% sludge content and a minimum of 1.983 g/cm3 for a sludge content of 50%. This was attributed due to the organic properties present in the brick. Moreover the water absorption percentage increased with the increased sludge percentage. With a minimum of 0.22 % was achieved for 30% to a maximum of 0.28% for 50%.

brick Kiln; Recycled Aggregates, C&D waste, concrete engineering properties, physical testing of RA’, Environmental impacts, sludge Solid waste management,

"APPLICATION OF CONSTRUCTION AND DEMOLITION WASTE: A SUSTAINABLE MANNER", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.254-265, May-2019, Available :http://www.jetir.org/papers/JETIR1905335.pdf

"APPLICATION OF CONSTRUCTION AND DEMOLITION WASTE: A SUSTAINABLE MANNER", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp254-265, May-2019, Available at : http://www.jetir.org/papers/JETIR1905335.pdf