• Priya Gajjal

The wear of sintered bearing materials were studied under dry condition using a dedicated test rig. The materials tested were Fe based alloy and additives added in it through sintering process. The performance of wear is evaluated against process and manufacturing parameters. Parametric influence on tribo-characteristics has been evaluated under varying condition of running. Effect of additive concentration has been shown in case of MoS2 and Zn-stearate impregnated bearings. A comparison of specific wear rate of bearings has been reported. Finally SEM micrographs have been taken to study the mechanism of tribo- process.

Sintered bearing, wear, process and manufacturing parameter, SEM micrograph

"Tribological Parametric Influence of Dry Sintered Iron Bearings", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.1-11, May-2019, Available :http://www.jetir.org/papers/JETIR1905801.pdf

"Tribological Parametric Influence of Dry Sintered Iron Bearings", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp1-11, May-2019, Available at : http://www.jetir.org/papers/JETIR1905801.pdf