• Aman vasantrao dable
• Subhash baliram dhotre
• Pravin ramesh jadhav
• Mohan Dusane

Plastic is a non-biodegradable substance which takes thousands of years to decompose that creates land as well as water pollution to the environment. The plastic usage is large in consumption and one of the largest plastic waste is polyethylene. As amount of clay required for brick is huge, In this project these waste plastic are effectively utilized in order to reduce the land space required to dump these waste. This creates prevention from various harmful Diseases. Polyethylene bags are cleaned and added with fine aggregates at various ratios to obtain a high strength bricks that possess thermal and sound Insulation properties. This is one of the best ways to avoid accumulation of Plastic waste. It also helps in reducing the use of sand. We are going to use Crushed sand ( IS 2386 Part 1),Waste plastic(IS 14535) and for the manufacturing of Bricks. We are going to perform 4 tests. The size of mould is 190x90x90 mm.The equipments that are going to be used are CTM Machine, Oven, Trowel, Tank and Mould. We are using four ratios(Plastic:Sand) 1:2 , 1:2.5 , 1:3 , 1:3.5

"Utilisation of waste plastic for manufacturing of plastic bricks", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.88-92, May-2019, Available :http://www.jetir.org/papers/JETIR1905E13.pdf

"Utilisation of waste plastic for manufacturing of plastic bricks", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp88-92, May-2019, Available at : http://www.jetir.org/papers/JETIR1905E13.pdf