• Mohit Umeshkumar Tanpathak
• G. E. Chavhan
• N.L. Bhirud
• D. R. Satpute

The development of engineering over the years has been the study of finding ever more efficient and convenient means of pushing and pulling, rotating, thrusting and controlling load, ranging from a few kilograms to thousands of tons. Presses are widely used to achieve this. The aim of this project is to integrate the mechanical system of hydraulic press with hydraulic system to facilitate the ease of stuffing operation Insertion process for inserting the stuffing assembly in outer shell of carried out by substrate assembly. The substrate assembly is formed by wrapping the insulating mat around the stuffing body prior to insertion into the shell structure. The assembly is then stuffed into the shell structure such that the mat is compressed between the shell structure and the substrate body. So for this process we have to design and develop the hydraulic power press machine to achieve the 15 ton pressure as per the company’s requirement. During the assembly process, the pressure exerted against the substrate body must be high enough to achieve a desired retention pressure level between the substrate body and the mat, but cannot be too high such that the substrate body becomes cracked or otherwise damaged. Moreover while inserting the stuffing assembly in outer shell of the silencer of engine it may be cause to generate the friction between side wall of the outer shell and stuffing assembly. It may be cause to serious damage to the stuffing assembly. Main objective is to reduce this damages and effects.

Design, Hydraulic press, Stuffing, Automation.

"Design and Manufacturing of Hydraulic Press For Stuffing Operation ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.445-451, May-2019, Available :http://www.jetir.org/papers/JETIR1905G64.pdf

"Design and Manufacturing of Hydraulic Press For Stuffing Operation ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp445-451, May-2019, Available at : http://www.jetir.org/papers/JETIR1905G64.pdf