• Amol Nandu Rathod
• Niranjan Vadakte
• Halallimath Shanmukhyya
• Mrs. Sheetal V. Kulkarni

The aim of this research paper is to develop the PLC and SCADA based color mixing process and making a various types of colors by using different ratios. In this process we were used three different colors i.e. red, yellow and blue. These are the basic primary colors by using these we can make six or more colors. Now a day high quality demand is increases more and more for that purpose the system has to be automated in which for automation PLC is used because of it, its quality, efficiency will automatically increases and also the production rate will increase. The modern controlled processor i.e. PLC (programmable logic controller) is controlled the process and make it automated. With help of some electronic devices like solenoid valve, relay circuit, proximity sensors, stirrer motor, level sensors and dc motor the process is fulfilled. The SCADA (supervisory control and data acquisition ) is used for monitoring the process.

PLC, SCADA, color, automation, monitoring, control, bottle filling, quality, efficiency

"PLC and SCADA Based Color Mixing and Color Making Process", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.645-650, May-2019, Available :http://www.jetir.org/papers/JETIR1905Q93.pdf

"PLC and SCADA Based Color Mixing and Color Making Process", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp645-650, May-2019, Available at : http://www.jetir.org/papers/JETIR1905Q93.pdf