• Akash Gautam kamble
• Ashwini Thaka Pathare
• Ms. Sheetal kulkarni

Aim of this research paper is to develop a smart stick for visually impaired people by using IOT. In this process we are going to use three different ultrasonic sensors is to detect any other obstacle in front of user within range of 300 cm. Moreover other sensor is also placed stick. We use here GPS for tracking the location of that blind person thus it is IOT based project. This can detect the location of blind person and send messages to relatives of user. This smart stick is detecting the obstacles at front, right side and left side of blind person. If the user was deaf then vibration motor is attached to that person so if obstacle is on the way of user then motor start vibrating. For programming of raspberry pi Python language is used.

IOT, Raspberry pi, GPS, ultrasonic sensor, monitoring, python, control

"Smart stick with monitoring iot for visually challenged people", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.544-548, June-2019, Available :http://www.jetir.org/papers/JETIR1906088.pdf

"Smart stick with monitoring iot for visually challenged people", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp544-548, June-2019, Available at : http://www.jetir.org/papers/JETIR1906088.pdf