• RAGHAV KUMAR RAGHU
• ANIKET BHAGWAN RANPISE
• PRASHANT NARAYAN ZINJURKE
• UTTARESHWAR RADHAKISAN BADADE
• KAILAS KOLEKAR

Waste heat recovery is the collection of heat created as an undesired by product of the operation of a piece of equipment or machinery to fill a desired purpose elsewhere waste heat recoupling methods range from simple to the complex. In this method, the heat going down a sink or shower drain is recovered by a copper pipe coiling around the drain pipe. On the more complex side, heat recover from liquid cooling systems in data centre can be used for part of facilities where warmer temperature are desired. Burning of fuel causes environmental problem like radio activity, global warming etc. so that these (coal, oil, gases) are the limiting resources hence resulting new technology for electricity generation, by using thermo electric generator to generate power as a most promising technology and environmental free. It is estimated that somewhere between 20 to 50% of industrial energy input is lost as waste heat in the form of hot exhaust gases, cooling water, and heat lost from hot equipment surfaces and heated products. As the industrial sectors continues efforts to improve its energy efficiency, recovering waste heat losses provides an attractive opportunity for an emission-free and less-costly energy resources. Numerous technology and combination of technologies are commercially available for waste heat recovery.

Waste heat recovery, Peltier plate, Seebeck effect, TEG and I C Engine etc.

"EXPRIMENTAL INVESTIGATION OF EFFICIENCY OF THERMOELECTRIC GENERATOR FOR WASTE HEAT RECOVERY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.604-610, June-2019, Available :http://www.jetir.org/papers/JETIR1906098.pdf

"EXPRIMENTAL INVESTIGATION OF EFFICIENCY OF THERMOELECTRIC GENERATOR FOR WASTE HEAT RECOVERY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp604-610, June-2019, Available at : http://www.jetir.org/papers/JETIR1906098.pdf