• P.Srinivasulu
• G.Mounica

In this present study, the experimental analysis of composite beams by using glass fiber and mild steel bars at the bottom of mortar beam. The depth of beam varying 20mm depth to 40mm depth with an interval of 5mm.By testing these specimens placing on the UTM mechanism equipment I found that breaking load, peak load , and displacement of the specimens by varying percentages of fiber content throughout the beam viz.1%,0.75% and 0.50% the mechanical properties are compared to conventional concrete beam is intended for M20 grade. Here I am analysed the breaking load vs deflection and depth of beam vs Deflection and percentage varying of glass fiber vs deflection .From the above analysis how the breaking load ,deflection varying with respected to 7 days,14days,28 days curing period.

composite beams, breaking load, glass fibre, mild steel bars, peak load, curing period

"Experimental analysis of composite beams by using glass fiber ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.918-930, June-2019, Available :http://www.jetir.org/papers/JETIR1906137.pdf

"Experimental analysis of composite beams by using glass fiber ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp918-930, June-2019, Available at : http://www.jetir.org/papers/JETIR1906137.pdf