• G.Mounika
• P.Srinivasulu
• K.Manjunath

In this present modelling analysis of composite beams by using glass fiber reinforced mortar beams at different percentages of glass fiber with mild steel bars at the bottom of the beam. The fallowing percentage of glass fiber content taken as volume basis viz 0%,0.50%,0.75%,1%.The ratio of modelling beam to normal beam is 1:10 ratio. The glass fiber composite mortar beam is compared to normal M20 grade of concrete beam. The experimental tests can be done by using Universal Testing Machine to finding the deflection of the beam, peak load, breaking load. The tests conducted for 7days,14days,28days of curing period. The centre point load is used to find deflection of the beam and plotted graph between breaking load vs deflection, variation of glass fiber content with respect to breaking load vs deflection and finally analysis can be done all the graphs and test results.

Breaking load, Peak load, Glass fibre reinforced beams, Composite beams, Modelling analysis

"MODELLING ANALYSIS OF COMPOSITE BEAMS BY USING GLASS FIBER REINFORCED MORTAR BEAMS AT DIFFERENT PERCENTAGES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.889-900, June-2019, Available :http://www.jetir.org/papers/JETIR1906561.pdf

"MODELLING ANALYSIS OF COMPOSITE BEAMS BY USING GLASS FIBER REINFORCED MORTAR BEAMS AT DIFFERENT PERCENTAGES", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp889-900, June-2019, Available at : http://www.jetir.org/papers/JETIR1906561.pdf