• SHOOAIB AHMAD ZARGAR
• ASHISH KUMAR

ABSTRACT In this developing era concrete and cement mortar are widely used by the construction Industry. As we also know that during the manufacturing of cement large amount of Co2 is released into the environment, but if we use such material that will replace the quantity of cement content therefore indirectly we are contributing towards the prevention of our planet from global warming and other pollutions . Also in this research work the Rice Husk Ash and waste Paper Sludge are used .The paper sludge which is the byproduct collected from paper mill and rice husk ash obtained from the rice processing units ,by adding these two products with concrete ,not only replaces the cement content but also increases the strength of concrete like compressive, flexural & split tensile strength etc .These two materials RHA & WPSA were incorporated with concrete with varying percentages of 5%,10%,15%, & 20% and there is an equal distribution of RHA and WPSA in every mix. The proper codal provisions were followed during the manufacturing the concrete cubes of 150 X 150 X 150mm , cylinders of size 70 X 150 and beams of size 100 X 100 X 500mm casted with varying percentages of RHA & WPSA . The total number of specimen which were prepared are 30 cubes 10 cylinders and 10 beams were casted with proper curing and the series of tests were conducted on these specimens like Split tensile ,Flexural strength and Compressive strength .

RICE HUSK ASH,WASTE PAPER SLUDGE ASH,COMPRESSIVE STRENGTH TEST,FLEXURAL STRENGTH TEST, SPLIT TENSILE TEST

"INCORPORATION OF RICE HUSK ASH AND WASTE PAPER SLUDGE ASH AS PARTIAL REPLACEMENT OF CEMENT IN M30 CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.922-928, June-2019, Available :http://www.jetir.org/papers/JETIR1906566.pdf

"INCORPORATION OF RICE HUSK ASH AND WASTE PAPER SLUDGE ASH AS PARTIAL REPLACEMENT OF CEMENT IN M30 CONCRETE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp922-928, June-2019, Available at : http://www.jetir.org/papers/JETIR1906566.pdf